Вопрос по кондиционеру

Здравствуйте, уважаемые калдиноводы. Вопрос: можно ли в систему кондиционера закачать просто воздух, чтобы проверить включается компрессор или нет (насколько я знаю без давления он не включится). И сколько атмосфер туда загонять?

Так я без трубок уже пол года гоняю . Как промывать то?

Добавлено спустя 1 минуту 2 секунды:
Я имел ввиду компрессор минуты три работал

Добавлено спустя 1 минуту 35 секунд:
Но отверстия в компрессоре заткнуты

Ещё вопрос: Как закрепить трубки между собой, в том месте, где они в салон уходят (трубка в трубку вставляется), по заводскому там защёлка пластиковая стоит, но у меня её нет, а заказывать её только вместе с трубками, отдельно нету

Так я без трубок уже пол года гоняю . Как промывать то?

Добавлено спустя 1 минуту 2 секунды:
Я имел ввиду компрессор минуты три работал

Добавлено спустя 1 минуту 35 секунд:
Но отверстия в компрессоре заткнуты

а радиатор тоже заткнут был? а испаритель? проблема то как раз в клапане который стоит перед испарителем, входное отверстие большое, а выходное нет, да еще и иглой затыкаеться, вот его и забивает, мыть водкой, чтобы масло смыть, потом водой, а потом сушить, либо компрессором либо пылесосом
Плохо каталог смотришь, фрейма у меня твоего нет поэтому брал от модификации CT196V-DXPDS
хотя разницы я думаю нет вот каталожные номера
88718-2D140
88718-2D150

Всё нормально, заправил. И всё работает, всем спасибо, я думаю тему можно закрывать

здравствуйте кто может мне помоч? Что за штука comtec Be Time A-31? Есть ли у кого схема подключения этого чудо юдо? Мой маил karenner2@rambler.ru

Я так понял, что это японский автозапуск с турботаймером. Нафиг он нужен.
Вот почитай о возможностях:
Тока на английском. Попробуй может переведёшь

Do real time and information of the engine start confirmation to remote control.
Three stage switch type of melody, buzzer, and no sound.
- The idling time and the time of the favorite of the turbo timer are set.
1. The engine idling (machine) time is a type of the selection of 10 minutes, 20 minutes, 30 minutes, and 40 minutes.
2. The time of the turbo timer is a manual. Selection type of OFF, 30 second, one minute, and five minutes
3. The time of Gros is a type of the selection of 5.8 seconds.
- Equipped with wireless door lock function (Be-970 (optional) is needed. )
- 1In the part model, option Be-965 (optional) is needed.
- Security system "Patron saint" can synchronize.
The start and the stop operation of the optional car theft warning device patron saint series are possible.
- Patron saint SS-300 can start the engine.
The engine start stop of this machine is possible by the remote control of optional car theft warning device patron saint SS-300.
- Equipped with threat function with LED lamp
A suspicious person is psychologically overpowered with the lamp with built-in the antenna unit LED at nighttime.
- Remote control can be added.
- Electric wave view attainment distance 3000M or more(our measurement height value)
- Our cell cutting immobilizer unit (option) can be added.
- The time of the cell is a type of automatic operation & manual operation selection.
- Restart & Ritorai function
- This product adopts the safety feature has by any chance.
1. Independent wiring system.
2. Mis-operation prevention function by ID code.
3. A/T shift stop function
4. Foot brake circuit - 3､Either of four is selected.
5. ACC detector circuit
6. Detecting function of voltage of battery
7. Bonnet sensor circuit - Option connection
8. Door opening (Carteshi) stop circuit
9. Sleep function to suppress current consumption of main body
- 8The engine in remote control cannot start when the vehicle engine between the days doesn't start.



BeTime A-73 Q&A


Q1 What is necessary for the installation of "Be Time"?
A1 The harness (optional) only for each model is needed. Moreover, the options such as "Adaptor for Imobi" and "Door lock wiring kit" (optional) are needed according to the installation model and the installation model. Please confirm "Harness acceptable table only for each model" before purchase and the installation.
Q2 Can you install it in the manual mission car?
A2 ｢Be Only domestic production and 12v and the automatic car can be the installations on Time". The manual mission car becomes improper the installation. Please confirm "Harness acceptable table only for each model" before purchase and the installation.
Q3 Can you install it in the smart key key free equipment car?
It becomes improper the installation because there is a possibility that the A3 key free function and the smart key function do not work normally. - 1The part model corresponds with the optional option adaptor.
Q4 Can you install it in the high Bullitt car?
A4 It becomes improper the installation.
Q5 Can you install it in the immobilizer equipment car?
A5 The model in which "Adaptor (optional) for Imobi" is set can be installed. Moreover, a part of spare key is needed in the model. Please confirm "Harness acceptable table only for each model" before purchase and the installation.
Q6 Can purity and keyless (remote control door lock/unlock) functions be used?
A6 There is a type that a pure, keyless function doesn't operate according to the model while the engine is starting. If it is a product for keyless, the door lock and the door unlock become possible because of the remote control operation of "Be Time". - 1The part model and a part of model need an optional option. Please confirm "Harness acceptable table only for each model" before purchase and the installation.
Q7 Do though the engine start can be normally done by the remote control though it becomes an answer backing error?
A7 There is a possibility that the remote control and the ID code in the antenna unit disappear. Please register ID again.
- Please see the manual of each product in detail.
Q8 Do though the distance of a jump of the remote control electric wave is short?
A8 There is a possibility that the body earth wiring when is installed is not appropriately done. Moreover, the installation antenna unit installation position and method of the connection are not appropriate places but the possibilities are in the car.
Вот ОНО Q9 When the batteries of the car are exchanged, it is "BeTime" did not operate?
A9 There is a possibility that the ID code in the antenna unit (main unit) disappears. Please register ID again. Moreover, when the adaptor for Imobi is installed, the Imobi registration is needed. - Please see the manual of each product in detail.
Q10 For how much period can the remote control battery be used?
A10 If it is a commodity of the type that uses the button battery, it is possible to use it for about one year by the engine start twice a day operation though it differs depending on the model and the use frequency.




ComTech engine starter BeTime A-73


- Here is recommendation *.
It is cold until a cold car commuting and the engine in the morning get warm and is painful. After waiting for the engine until getting warm in the morning without the time, the departure is the one not going. The convenience at such time is an engine starter.

As for ComTech engine starter BeTime A-73 introduces this time, the idling time of the favorite can be set to 10 minutes, 20 minutes, 30 minutes, and 40 minutes by selecting it, and the answer backing system can inform remote control of the engine start confirmation in real time.
If the answer backing system is this even when the engine sound doesn't reach when in the system that can confirm whether the engine started really, there is far a car, it is safe.

Moreover, 1, foot brake circuit * of mis-operation prevention function and A/T shift stop function *, 2(* Either 1 or 2 is selected) by the independent wiring system and the ID code, and the ACC detector circuit and the detecting function of the voltage of the battery. Because the safety feature has by any chance of the sleep function etc. to suppress the current consumption of door opening (Carteshi) bonnet sensor circuit (* the option connection) and stop circuit and main body is adopted, it is possible to use it at ease.

Additionally, turbo timer function and wireless door lock function(Be-970 is needed. - 1Option Be-965 is necessary for the part model. ) ､Only domestic production and 12v and the automatic car can be the installations on ComTech engine starter BeTime A-73 equipped with a variegated function like the threat function with the LED lamp etc.The manual mission car becomes improper the installation. Moreover, this price is super-discount equipped with the answer backing system though the customer should prepare the harness (optional) only for each model. It prepared by a special price of the stock limit this time, and buy it, please ..bringing forward...

(royal mail order and stocking charge)




ComTech engine starter BeTime A-73 specification


Transmitter(remote control)


Technological standard Wireless equipment agreement for RCR telecontrol standard
Transmission frequency 429.2MHz belt One wave of ten waves
Transmission output 10mW
Types of radio wave F1D
Call name When transmitting, it transmits automatically.
Frequency stability level Within ±4ppm
Several cycle Catayouts ±2.5CKHz or less
Transmission time Within three seconds
Transmission rest time Within two seconds
Reception frequency 429.2MHz belt One wave of ten waves
Reception sensitivity -It steady operates by 116dBm or less.
Bureau departure stability level Within ±4ppm
Sending and receiving antenna Built-in rod antenna
Range of operating temperature -20℃～+60℃
Use battery Lithem battery CR2032×2
Size of case 32.5(W)×64(H)×16(D)mm
Weight 33g(The battery contains it. )

Antenna unit


Technological standard Wireless equipment agreement for RCR telecontrol standard
Transmission frequency 429.2MHz belt One wave of ten waves
Transmission output 10mW
Types of radio wave F1D
Call name When transmitting, it transmits automatically.
Frequency stability level Within ±4ppm
Several cycle Catayouts ±2.5CKHz or less
Transmission time Within three seconds
Transmission rest time Within two seconds
Reception frequency 429.2MHz belt One wave of ten waves
Reception sensitivity -It steady operates by 116dBm or less.
Bureau departure stability level Within ±4ppm
Sending and receiving antenna 1/4λ whip antenna
Range of operating temperature -20℃～+70℃
Power-supply voltage Car exclusive use of 12V
Current consumption 10mA or less when standing by(security mode OFF)
Size of case 49(W)×79(H)×20(D)mm

The main unit(relay part)


Relay capacity and number 40A×2(IG1･IG2)25A×4(ACC･ST1･ST2･ST-CONT)
Size of case 66.5(W)×127.5(H)×29(D)mm

Спасибо за ответ. Просто купил машину а на нем поставлено этот блок. А у меня характер такой если что то поставлено то должно работать. Я очень хочу найти схему его подключения.

Доброго времени суток! Прошу помощи, ибо отчаялся уже( Не работает кнопка кондиционера. Машина куплена недавно, калдина 191 кузов, не было компрессора кондиционера: поставил, заправил - не включается. Проверил реле на радиаторе - работает, предохранитель - работает, давление 7 атмосфер, при 5 должен включиться, датчик на осушителе работает, перемыкал; блок над кнопками ставил другой - работает, кроме АС и эконом. Прошу комментариев по существу.

может коса где перебита